Angular Contact Ball Bearings

Angular Contact Ball Bearings

Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that these bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads.

The axial load carrying capacity of angular contact ball bearings increases as the contact angle increases. The contact angle is defined as the angle between the line joining the points of contact of the ball and the raceways in the radial plane, along which the combined load is transmitted from one raceway to another, and a line perpendicular to the bearing axis.

PDF
Down		 Inquiry Model Principal Dimensions Basic Load Rating Speed (r/min)
Inner Diameter Outer Diameter Width Cr Cor Reference speed Limiting speed
[mm] [mm] [mm] (kN) (kN) [r/min] [r/min]
718/500 AMB 500 620 56 390 850 1000 1000
719/500 AGMB 500 670 78 553 1220 950 1000
718/530 AMB 530 650 56 390 900 950 1000
719/530 ACM 530 710 82 618 1340 850 900
719/560 AMB 560 750 85 592 1290 800 850
70/600 AGMB 600 870 118 884 2160 700 750
708/600 AGMB 600 730 42 338 735 800 850
708/600 AMB 600 730 42 338 735 800 850
718/600 AMB 600 730 60 449 1100 800 850
719/600 ACM 600 800 90 715 1730 750 750
70/670 AMB 670 980 136 1170 3100 600 null
718/670 ACMB 670 820 69 553 1290 700 750
718/670 AMB 670 820 69 527 1250 700 750
718/710 ACMB 710 870 74 605 1630 630 null
718/710 AMB 710 870 74 572 1560 630 670
719/710 ACMB 710 950 106 852 2200 600 630
718/750 ACMB 750 920 78 650 1800 600 630
718/750 AGMB 750 920 78 618 1730 600 630
BA1B 311576 762 889 63.5 449 1270 560 600
718/850 AMB 850 1030 82 689 1860 500 530