Angular Contact Ball Bearings

Angular Contact Ball Bearings

Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that these bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads.

The axial load carrying capacity of angular contact ball bearings increases as the contact angle increases. The contact angle is defined as the angle between the line joining the points of contact of the ball and the raceways in the radial plane, along which the combined load is transmitted from one raceway to another, and a line perpendicular to the bearing axis.

PDF
Down		 Inquiry Model Principal Dimensions Basic Load Rating Speed (r/min)
Inner Diameter Outer Diameter Width Cr Cor Reference speed Limiting speed
[mm] [mm] [mm] (kN) (kN) [r/min] [r/min]
QJ 324 N2MA 120 260 55 415 530 4500
QJ 226 N2MA 130 230 40 310 400 4800
QJ 326 N2MA 130 280 58 455 610 4000
QJ 228 N2MA 140 250 42 345 475 4300
QJ 328 N2MA 140 300 62 500 695 3800
QJ 1030 N2MA 150 225 35 242 335 4500
QJ 230 N2MA 150 270 45 400 570 4000
QJ 330 N2MA 150 320 65 530 765 3600
QJ 232 N2MA 160 290 48 450 670 3800
QJ 332 N2MA 160 340 68 570 880 3400
QJ 234 N2MA 170 310 52 455 720 3400
QJ 334 N2MA 170 360 72 655 1040 3200
QJ 236 N2MA 180 320 52 475 765 3400
QJ 336 N2MA 180 380 75 680 1100 3000
QJ 1038 N2MA 190 290 46 364 560 3400
QJ 238 N2MA 190 340 55 510 850 3200
QJ 338 N2MA 190 400 78 702 1160 2800
QJ 240 N2MA 200 360 58 540 915 3000
QJ 1244 N2MA 220 400 78 592 1020 2600
QJ 344 N2MA 220 460 88 780 1400 2400