Self-aligning Ball Bearings

Self-aligning ball bearings have two rows of balls, a common sphered raceway in the outer ring and two deep uninterrupted raceway grooves in the inner ring. They are available open or sealed. The bearings are insensitive to angular misalignment of the shaft relative to the housing, which can be caused, for example, by shaft deflection.

PDF
Down
Inquiry Model Inner Diameter (mm) Outer Diameter (mm) Width (mm) Basic Load Rating Limiting Speed
d [mm] B [mm] B [mm] C (kN) [r/min]
1215 75 130 25 39 6700
1216 K 80 140 26 39.7 6000
1217 K 85 150 28 48.8 5600
1218 90 160 30 57.2 5300
1301 ETN9 12 37 12 9.36 28000
1302 ETN9 15 42 13 10.8 24000
13030 150 225 56 57.2 3400
1307 EKTN9 35 80 21 26.5 11000
1308 EM 40 90 23 33.8 9500
1311 EKTN9 55 120 29 50.7 7500
1312 ETN9 60 130 31 58.5 6300
1315 K 75 160 37 79.3 5600
1318 90 190 43 117 4500
1319 95 200 45 133 4300
1322 KM 110 240 50 163 3600
13944 220 300 60 60.5 2400
2204 ETN9 20 47 18 16.8 20000
2205 ETN9 25 52 18 16.8 18000
2206 E-2RS1TN9 30 62 20 15.6 7500
2206 ETN9 30 62 20 23.8 15000