Angular Contact Ball Bearings

Angular Contact Ball Bearings

Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that these bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads.

The axial load carrying capacity of angular contact ball bearings increases as the contact angle increases. The contact angle is defined as the angle between the line joining the points of contact of the ball and the raceways in the radial plane, along which the combined load is transmitted from one raceway to another, and a line perpendicular to the bearing axis.

PDF
Down		 Inquiry Model Principal Dimensions Basic Load Rating Speed (r/min)
Inner Diameter Outer Diameter Width Cr Cor Reference speed Limiting speed
[mm] [mm] [mm] (kN) (kN) [r/min] [r/min]
7222 BEGAF 110 200 38 163 156 4000 4000
7222 BEP 110 200 38 153 143 4000 3600
7322 BECBM 110 240 50 240 245 3600 4500
7322 BECBP 110 240 50 240 245 3400 3600
7322 BECBY 110 240 50 240 245 3400 3600
7322 BECCM 110 240 50 240 245 3600 4500
7322 BEGAM 110 240 50 240 245 3600 4500
7322 BEGBM 110 240 50 240 245 3600 4500
7322 BEM 110 240 50 225 224 3600 4000
7322 BEP 110 240 50 225 224 3400 3200
7024 BGM 120 180 28 87.1 93 4000 4000
7224 BCBM 120 215 40 165 163 3600 4300
7224 BGAM 120 215 40 165 163 3600 4300
7224 BM 120 215 40 165 163 3600 4300
7324 BCBM 120 260 55 238 250 3200 3600
7324 BGAM 120 260 55 238 250 3200 3600
7324 BGBM 120 260 55 238 250 3200 3600
7226 BCBM 130 230 40 186 193 3400 4000
7226 BGAM 130 230 40 186 193 3400 4000
7226 BM 130 230 40 186 193 3400 4000