Angular Contact Ball Bearings

Angular Contact Ball Bearings

Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that these bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads.

The axial load carrying capacity of angular contact ball bearings increases as the contact angle increases. The contact angle is defined as the angle between the line joining the points of contact of the ball and the raceways in the radial plane, along which the combined load is transmitted from one raceway to another, and a line perpendicular to the bearing axis.

PDF
Down		 Inquiry Model Principal Dimensions Basic Load Rating Speed (r/min)
Inner Diameter Outer Diameter Width Cr Cor Reference speed Limiting speed
[mm] [mm] [mm] (kN) (kN) [r/min] [r/min]
7219 BEP 95 170 32 124 108 4500 4300
7319 BECBM 95 200 45 180 163 4300 5600
7319 BECBP 95 200 45 180 163 4000 4300
7319 BECBY 95 200 45 180 163 4000 4300
7319 BEGAF 95 200 45 168 150 4000 3800
7319 BEGAM 95 200 45 180 163 4300 5600
7319 BEGAP 95 200 45 180 163 4000 4300
7319 BEGAY 95 200 45 180 163 4000 4300
7319 BEGBY 95 200 45 180 163 4000 4300
7319 BEM 95 200 45 168 150 4300 4800
7319 BEP 95 200 45 168 150 4000 3800
7419 GAM 95 250 55 251 245 3400 3400
7220 BECBM 100 180 34 143 134 4500 6000
7220 BECBP 100 180 34 143 134 4500 4500
7220 BECBY 100 180 34 143 134 4500 4500
7220 BECCM 100 180 34 143 134 4500 6000
7220 BEGAM 100 180 34 143 134 4500 6000
7220 BEGAY 100 180 34 143 134 4500 4500
7220 BEP 100 180 34 135 122 4500 4000
7320 BECBM 100 215 47 216 208 4000 5000