Angular Contact Ball Bearings

Angular Contact Ball Bearings

Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that these bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads.

The axial load carrying capacity of angular contact ball bearings increases as the contact angle increases. The contact angle is defined as the angle between the line joining the points of contact of the ball and the raceways in the radial plane, along which the combined load is transmitted from one raceway to another, and a line perpendicular to the bearing axis.

PDF
Down		 Inquiry Model Principal Dimensions Basic Load Rating Speed (r/min)
Inner Diameter Outer Diameter Width Cr Cor Reference speed Limiting speed
[mm] [mm] [mm] (kN) (kN) [r/min] [r/min]
7215 BEGAY 75 130 25 73.5 65.5 6300 6300
7215 BEP 75 130 25 70.2 60 6000 5600
7315 BECBJ 75 160 37 132 104 5300 5300
7315 BECBM 75 160 37 132 104 5300 7000
7315 BECBP 75 160 37 132 104 5300 5300
7315 BECBY 75 160 37 132 104 5300 5300
7315 BEGAM 75 160 37 132 104 5300 7000
7315 BEGAP 75 160 37 132 104 5300 5300
7315 BEGAPH 75 160 37 132 104 5300 5300
7315 BEP 75 160 37 125 98 5300 5000
7415 BCBM 75 190 45 168 140 4500 6000
7415 BGAM 75 190 45 168 140 4500 6000
7415 BGBM 75 190 45 168 140 4500 6000
7216 BECBJ 80 140 26 85 75 5600 5600
7216 BECBM 80 140 26 85 75 5600 7500
7216 BECBP 80 140 26 85 75 5600 5600
7216 BECBY 80 140 26 85 75 5600 5600
7216 BEGAF 80 140 26 80.6 69.5 5600 5300
7216 BEGAM 80 140 26 85 75 5600 7500
7216 BEGAP 80 140 26 80.6 69.5 5600 5300