Angular Contact Ball Bearings

Angular Contact Ball Bearings

Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that these bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads.

The axial load carrying capacity of angular contact ball bearings increases as the contact angle increases. The contact angle is defined as the angle between the line joining the points of contact of the ball and the raceways in the radial plane, along which the combined load is transmitted from one raceway to another, and a line perpendicular to the bearing axis.

PDF
Down		 Inquiry Model Principal Dimensions Basic Load Rating Speed (r/min)
Inner Diameter Outer Diameter Width Cr Cor Reference speed Limiting speed
[mm] [mm] [mm] (kN) (kN) [r/min] [r/min]
7212 BEGAM 60 110 22 61 50 7500 10000
7212 BEGAP 60 110 22 61 50 7000 7500
7212 BEGBP 60 110 22 61 50 7000 7500
7212 BEP 60 110 22 57.2 45.5 7000 7000
7312 ACCBM 60 130 31 116 85 7000 10000
7312 BECAP 60 130 31 104 76.5 6300 6700
7312 BECBJ 60 130 31 104 76.5 6300 6700
7312 BECBM 60 130 31 104 76.5 6700 8500
7312 BECBP 60 130 31 104 76.5 6300 6700
7312 BECBPH 60 130 31 104 76.5 6300 6700
7312 BECBY 60 130 31 104 76.5 6300 6700
7312 BECCM 60 130 31 104 76.5 6700 8500
7312 BEGAM 60 130 31 104 76.5 6700 8500
7312 BEGAP 60 130 31 104 76.5 6300 6700
7312 BEGAY 60 130 31 104 76.5 6300 6700
7312 BEGBM 60 130 31 104 76.5 6700 8500
7312 BEGBP 60 130 31 104 76.5 6300 6700
7312 BEGBY 60 130 31 104 76.5 6300 6700
7312 BEP 60 130 31 95.6 69.5 6300 6000
7412 BCBM 60 150 35 119 86.5 5600 7500