Angular Contact Ball Bearings

Angular Contact Ball Bearings

Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that these bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads.

The axial load carrying capacity of angular contact ball bearings increases as the contact angle increases. The contact angle is defined as the angle between the line joining the points of contact of the ball and the raceways in the radial plane, along which the combined load is transmitted from one raceway to another, and a line perpendicular to the bearing axis.

PDF
Down		 Inquiry Model Principal Dimensions Basic Load Rating Speed (r/min)
Inner Diameter Outer Diameter Width Cr Cor Reference speed Limiting speed
[mm] [mm] [mm] (kN) (kN) [r/min] [r/min]
7210 BECBJ 50 90 20 40 31 9000 9000
7210 BECBM 50 90 20 39 31 9000 12000
7210 BECBP 50 90 20 40 31 9000 9000
7210 BECBPH 50 90 20 40 31 9000 9000
7210 BECBY 50 90 20 40 31 9000 9000
7210 BEGAP 50 90 20 40 31 9000 9000
7210 BEGBP 50 90 20 40 31 9000 9000
7210 BEP 50 90 20 37.7 28.5 9000 8500
7310 ACCBM 50 110 27 83 57 8000 12000
7310 BE-2RZP 50 110 27 68.9 47.5 7500 6000
7310 BECAM 50 110 27 75 51 8000 10000
7310 BECBJ 50 110 27 75 51 7500 8000
7310 BECBM 50 110 27 75 51 8000 10000
7310 BECBP 50 110 27 75 51 7500 8000
7310 BECBY 50 110 27 75 51 8000 8000
7310 BEGAF 50 110 27 68.9 47.5 7500 7500
7310 BEGAM 50 110 27 75 51 8000 10000
7310 BEGAP 50 110 27 75 51 7500 8000
7310 BEGAPH 50 110 27 75 51 7500 8000
7310 BEGAY 50 110 27 75 51 8000 8000