Angular Contact Ball Bearings

Angular Contact Ball Bearings

Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that these bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads.

The axial load carrying capacity of angular contact ball bearings increases as the contact angle increases. The contact angle is defined as the angle between the line joining the points of contact of the ball and the raceways in the radial plane, along which the combined load is transmitted from one raceway to another, and a line perpendicular to the bearing axis.

PDF
Down		 Inquiry Model Principal Dimensions Basic Load Rating Speed (r/min)
Inner Diameter Outer Diameter Width Cr Cor Reference speed Limiting speed
[mm] [mm] [mm] (kN) (kN) [r/min] [r/min]
7307 BEGAM 35 80 21 41.5 26.5 11000 15000
7307 BEGAP 35 80 21 41.5 26.5 11000 11000
7307 BEGAPH 35 80 21 41.5 26.5 11000 11000
7307 BEGBP 35 80 21 41.5 26.5 11000 11000
7307 BEP 35 80 21 39 24.5 11000 10000
7407 BCBM 35 100 25 60.5 38 9000 12000
7407 BM 35 100 25 60.5 38 9000 12000
7208 ACCBM 40 80 18 41.5 29 11000 17000
7208 BE-2RZP 40 80 18 34.5 24 10000 8000
7208 BECBJ 40 80 18 36.5 26 10000 11000
7208 BECBM 40 80 18 36.5 26 11000 14000
7208 BECBP 40 80 18 36.5 26 10000 11000
7208 BECBY 40 80 18 36.5 26 11000 11000
7208 BEGAP 40 80 18 36.5 26 10000 11000
7208 BEGBY 40 80 18 36.5 26 11000 11000
7208 BEP 40 80 18 34.5 24 10000 10000
7308 ACCBM 40 90 23 56 36 10000 15000
7308 BE-2RZP 40 90 23 46.2 30.5 9500 7500
7308 BECAP 40 90 23 50 32.5 9500 10000
7308 BECBJ 40 90 23 50 32.5 9500 10000