Angular Contact Ball Bearings

Angular Contact Ball Bearings

Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that these bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads.

The axial load carrying capacity of angular contact ball bearings increases as the contact angle increases. The contact angle is defined as the angle between the line joining the points of contact of the ball and the raceways in the radial plane, along which the combined load is transmitted from one raceway to another, and a line perpendicular to the bearing axis.

PDF
Down		 Inquiry Model Principal Dimensions Basic Load Rating Speed (r/min)
Inner Diameter Outer Diameter Width Cr Cor Reference speed Limiting speed
[mm] [mm] [mm] (kN) (kN) [r/min] [r/min]
7310 BEGBP 50 110 27 75 51 7500 8000
7310 BEGBY 50 110 27 75 51 8000 8000
7310 BEP 50 110 27 68.9 47.5 7500 7500
7410 BCBM 50 130 31 95.6 64 7000 9000
7410 BGAM 50 130 31 95.6 64 7000 9000
7410 BM 50 130 31 95.6 64 7000 9000
7211 ACCBM 55 100 21 57 45 8500 13000
7211 BE-2RZP 55 100 21 46.2 36 7500 7500
7211 BECBJ 55 100 21 49 40 8000 8000
7211 BECBM 55 100 21 49 40 8000 11000
7211 BECBP 55 100 21 49 40 8000 8000
7211 BECBPH 55 100 21 49 40 8000 8000
7211 BECBY 55 100 21 49 40 8000 8000
7211 BEGAP 55 100 21 49 40 8000 8000
7211 BEGBY 55 100 21 49 40 8000 8000
7211 BEP 55 100 21 46.2 36 7500 7500
7311 ACCBM 55 120 29 96.5 67 7500 11000
7311 BECBJ 55 120 29 85 60 7000 7000
7311 BECBM 55 120 29 85 60 7000 9500
7311 BECBP 55 120 29 85 60 7000 7000