Angular Contact Ball Bearings

Angular Contact Ball Bearings

Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that these bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads.

The axial load carrying capacity of angular contact ball bearings increases as the contact angle increases. The contact angle is defined as the angle between the line joining the points of contact of the ball and the raceways in the radial plane, along which the combined load is transmitted from one raceway to another, and a line perpendicular to the bearing axis.

PDF
Down		 Inquiry Model Principal Dimensions Basic Load Rating Speed (r/min)
Inner Diameter Outer Diameter Width Cr Cor Reference speed Limiting speed
[mm] [mm] [mm] (kN) (kN) [r/min] [r/min]
7311 BECBPH 55 120 29 85 60 7000 7000
7311 BECBY 55 120 29 90 65.5 7000 7000
7311 BECCM 55 120 29 85 60 7000 9500
7311 BEGAM 55 120 29 85 60 7000 9500
7311 BEGAP 55 120 29 85 60 7000 7000
7311 BEGAY 55 120 29 85 60 7000 7000
7311 BEGBM 55 120 29 85 60 7000 9500
7311 BEGBP 55 120 29 85 60 7000 7000
7311 BEGBY 55 120 29 85 60 7000 7000
7311 BEP 55 120 29 79.3 55 7000 6700
7411 BCBM 55 140 33 111 76.5 6300 8000
7411 BGAM 55 140 33 111 76.5 6300 8000
7411 BGBM 55 140 33 111 76.5 6300 8000
7411 BGM 55 140 33 111 76.5 6300 8000
7411 BM 55 140 33 111 76.5 6300 8000
7212 ACCBM 60 110 22 69.5 56 7500 12000
7212 BECBJ 60 110 22 61 50 7000 7500
7212 BECBM 60 110 22 61 50 7500 10000
7212 BECBP 60 110 22 61 50 7000 7500
7212 BECBY 60 110 22 61 50 7000 7500