Angular Contact Ball Bearings

Angular Contact Ball Bearings

Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that these bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads.

The axial load carrying capacity of angular contact ball bearings increases as the contact angle increases. The contact angle is defined as the angle between the line joining the points of contact of the ball and the raceways in the radial plane, along which the combined load is transmitted from one raceway to another, and a line perpendicular to the bearing axis.

PDF
Down		 Inquiry Model Principal Dimensions Basic Load Rating Speed (r/min)
Inner Diameter Outer Diameter Width Cr Cor Reference speed Limiting speed
[mm] [mm] [mm] (kN) (kN) [r/min] [r/min]
7217 BEGAP 85 150 28 102 90 5300 5300
7217 BEP 85 150 28 95.6 83 5300 5000
7317 BECBF 85 180 41 146 122 4500 4300
7317 BECBJ 85 180 41 156 132 4500 4800
7317 BECBM 85 180 41 156 132 4800 6300
7317 BECBP 85 180 41 156 132 4500 4800
7317 BECBY 85 180 41 156 132 4500 4800
7317 BECCM 85 180 41 156 132 4800 6300
7317 BEGAF 85 180 41 146 122 4500 4300
7317 BEGAM 85 180 41 156 132 4800 6300
7317 BEGAP 85 180 41 156 132 4500 4800
7317 BEGAPH 85 180 41 156 132 4500 4800
7317 BEP 85 180 41 146 122 4500 4300
7417 BACBMC 85 210 52 190 166 4000 4000
7417 BAGAMC 85 210 52 190 166 4000 4000
7218 BECBJ 90 160 30 116 104 5000 5000
7218 BECBM 90 160 30 116 104 5000 6700
7218 BECBP 90 160 30 116 104 5000 5000
7218 BECBY 90 160 30 116 104 5000 5000
7218 BECCM 90 160 30 116 104 5000 6700